Voltronic RS232 EG4 6000EX 6500EX F/;TD/;1 FT231XS USB to RJ45 RS232 Port Serial Cable(1.0M)

Voltronic RS232 EG4 6000EX 6500EX F/;TD/;1 FT231XS USB to RJ45 RS232 Port Serial CableConnector A: USB 2.0 A MaleConnector B: RJ45 RS232F/;TD/;1 FT231XS Chip Import from UK , Quality Guarenteed !Support Win7/8/10/11/2000/xp/android/mac os/linux/vista/winceSupport EEPROM, FT-Prog SoftwareMaterial : p/;vc Jacket, Bare Copper WiresCE, ComplianceWire Gauge :28AWG , OD:5.0F/;TD/;1 Driver Download:https://ftdichip.com/drivers/vcp-drivers/Installation Guides: https://ftdichip.com/document/installation-guides/The RS232 port provides better isolation between monitoring device and inverter as the inverter m;ic/ro USB port outputs 5.1V USB power which isn't ideal when it feeds into your monitoring device USB bus.RS232 is more resilient against electronic signal disturbance (noise) compared to USB. When measuring noise, the Voltronic inverter RS232 port has a lower amount compared to the m;ic/ro USB port.A few examples of Voltronic inverters are:compatible with the Axpertcompatible with the EG4 6000EX, 6500EXcompatible with the Mecercompatible with the MPP Solarcompatible with the Phocoscompatible with the RCTcompatible with the The Sun PaysAbout F/;TD/;1 FT231FT231X Full Speed USB to Full Handshake UARTKey Hardware FeaturesThis USB2.0 Full Speed IC offers a compact bridge to full handshake UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT231X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.Single chip USB to asynchronous serial data transfer interface.Entire USB protocol handled on the chip. No USB specific firmware programming required.Fully integrated 2048 byte EEPROM compatible with the storing device descriptors and CBUS I/O configuration.Fully integrated clock generation with no exter

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB specific firmware programming required.
• Fully integrated 2048 byte EEPROM compatible with the storing device descriptors and CBUS I/O configuration.
• Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
• Data transfer rates from 300 baud to 3 Mbaud.